7/8″ – OUTSIDE CORNER CONVEN. DIAMOND FURR:

PDF CAD Download

A variety of downloads including DWG is available in cad download link.  

  1. Click the cad download link.
  2. Then click the download link in the upper right hand corner & pick from the available file types. 

Description

Specifications
p-1007-dfosc-375-product-page5.pdf
p-1007-dfoc-375-install4.dwg

Continuous Furring

Diamond-Furr ® 7/8″ – OUTSIDE CORNER CONVEN. Furring Strips have a patented design that offers the best solution to the moisture intrusion problems that have plagued the plastering industry for decades. Diamond-Furr’s Continuous Insulation (CI) System trims are intended for use on projects complying with the new energy code requirements when using 3-coat plaster over continuous rigid insulation.

The 18 gauge Outside Corner Furring Strips (pt# DFOC-375) are similar to the standard Diamond-Furr Furring Strips with the furring leg bent at a 135 degree angle. The Corner Furring Strips are installed on outside corners directly over the weather barrier and fastened to the vertical corner framing members using waferhead screws through the provided attachment holes. If a liquid air/water barrier product is applied the Corner Trims can be installed directly to the substrate resulting in 100% elimination of the penetrations through the moisture barrier!

7/8″ – OUTSIDE CORNER CONVEN<\h2>

The Corner Trim furring leg protrudes beyond the corner by 3/8″ to provide a precision mounting point for metal lath and continuous furring resulting in superior lath embedment around corners. Lath is secured to the Diamond-Furr trim with a butterfly tie using 18 gauge tie wire through the 5/16″ holes that are provided.

We recommend using Diamond-Furr’s Furring Strips with the full line of Diamond-Furr Trims for a complete system and the best available protection against moisture intrusion, minimized thermal bridging, superior lath embedment and significantly reduced exposure to moisture migration responsibility.

These products are meant to be used all together as a complete system to give the best results.

MATERIAL: 18 Gauge Galvanized Steel G60

ICC: ESR-3232

3-Pt CSI Specification 1″ CI System

Full List of Diamond-Furr ® products for 1″ CI System

PART # DESCRIPTION
DF-1375 Field Furring Strip
DFOC-1375 Outside Corner
DFS-1375 Plaster Stop
DFW-1375 Weep Screed
DFWD-1375 Window Drip
DFR-1375 Residential Window Furr/Flashing
DFXS-1375 Expansion Joint
DF-SSP Straight Splicing Part
DFC Clips for Trim Attachment

Pin It on Pinterest