top logo

name

Part Name :DIAMOND FURR: CONVEN. 7/8" - RESID WINDOW FLASH / FURRING
Part Number : DFR-375
 
Description

Conventional 7/8" cement plaster

TheDiamond-Furr ® Residential Window Flashing/Furring Trim has a unique design that offers the first real solution to the moisture intrusion problems that have plagued the plastering industry for decades.

Diamond-Furr's Residential Window Flashing / Furring Trim (pt# DFR-375) is designed to be installed around windows manufactured with a 7/8" cement plaster depth ground incorporated in the frame design. The trim provides pre-tensioned metal flashing over the nailing flange of the windows and has a built-in furring strip. This strip provides a continuous 3/8" furring as well as a flexible connection point for metal lath. The tie wire connection effectively eliminates 100% of fastener penetrations through the water barrier. It also means that the lath never comes in contact with the paper so accidental tears in the last line of defense by over tightened screws will never happen.

 Another advantage of the Diamond-Furr Window Flashing is that it removes the need for additional petroleum based peel and stick moisture barrier products. Less buildup results in a true 7/8" cement plaster depth at the termination points and less potential for cracking at these critical points.
 
OPTIONAL: The Diamond-Furr Window Flashing/Furring Trim is also available with a built-in plaster stop designed to allow for a 1/4" expansion joint between the window frame and plaster.

The Diamond-Furr Termination Trims are designed to work as a complete system with the ICC approved Diamond-Furr Furring Strips which reduce fastener penetrations in the field by 55%. When used as a complete system your project has the best possible protection against moisture intrusion and will greatly reduce your exposure to moisture migration responsibility.

 

Both the Furring Strips and Termination Trims have been designed in longer ground lengths - CI System - for use on projects conforming to the new energy code requirements when using 3-coat cement plaster over continuous rigid insulation.

MATERIAL: 26 Gauge Galvanized Steel G90

ICC: ESR-3232

3-Pt CSI Specification for conventional 7/8" cement plaster

Full List of Diamond-Furr ® products for conventional 7/8" cement plaster

PART # DESCRIPTION  
DF-375 Field Furring Strip  
DFOC-375 Outside Corner  
DFS-375 Plaster Stop  
DFW-375 Weep Screed  
DFWD-375 Window Drip  
DFR-375 Residential Window Furr/Flashing  
DFXS-375 Expansion Joint  
DF-SSP Straight Splicing Part  
DFC Clips for Trim Attachment  

 

 

 

Catalog
window flashing furring conventional 7/8DIAMOND_FURR___R_4fe20694c5096.jpg
window flashing furring conventional 7/8
window flashing furring conventional 7/8DIAMOND_FURR___R_4fe20694c5096.jpg
window flashing furring conventional 7/8DIAMOND_FURR___R_4fe20694c5096.jpg
window flashing furring conventional 7/8DIAMOND_FURR___R_4fe20694c5096.jpg