Description
F Mold Plaster Trim
Specifications
p-275-bigimage11_130110042735.dwg
The F mold creates a reveal where plaster terminates against dissimilar material or sills, jambs and ceilings. The F Reveal can be vented for use in a soffit for ventilation and can be bent for radius applications.
Comparable to: FDM, FP, FD
PRODUCT SUBMITTAL SHEET: (Click on the PDF logo above)
MATERIAL: Aluminum Alloy 6063 T5 ASTM: B221
THICKNESS: Nominal .050 LENGTH: Standard 10 ft.
FINISH: Standard – Clear anodized; Architectural 200R1 Medium Etch AAM32C10A21
Also available: Alodine® Paint Grade finish – also known as ‘chemical conversion’, custom anodized finishes & Kynar® brand paint.
| Dim. A | Dim. B | PART # | VENTED PT # |
| 3/8″ | 1/2″ | FDM 375-50 |
N.A. |
| 1/2″ | 1/2″ | FDM 50-50 | FDM 50-V-50 |
| 1/2″ | 3/4″ | FDM 50-75 | FDM 50-V-75 |
| 1/2″ | 1″ | FDM 50-100 | FPM 50-V-100 |
| 1/2″ | 1-1/2″ | FDM 50-150 | FDM 50-V-150 |
| 1/2″ | 2″ | FDM 50-200 | FDM 50-V-200 |
| 1/2″ | 3″ | FDM 50-300 | FDM 50-V-300 |
| 1/2″ | 4″ | FDM 50-400 | FDM 50-V-400 |
| 3/4″ | 1/2″ | FPM 75-50 | FPM 75-V-50 |
| 3/4″ | 3/4″ | FPM 75-75 | FPM 75-V-75 |
| 3/4″ | 1″ | FPM 75-100 | FPM 75-V-100 |
| 3/4″ | 1-1/2″ | FPM 75-150 | FPM 75-V-150 |
| 3/4″ | 2″ | FPM 75-200 | FPM 75-V-200 |
| 3/4″ | 3″ | FPM 75-300 | FPM 75-V-300 |
| 3/4″ | 4″ | FPM 75-400 | FPM 75-V-400 |
| 3/4″ | 6″ | FPM 75-600 | N.A. |
F Mold Plaster Trim
OPTIONS:
Factory Masking – All ‘F’ Reveals are available with a manufacturer applied protective vinyl tape over the reveal
Intersections – 3-way intersections as well as inside and outside corners are available
Venting – ‘F’ Reveals from ½” width to 4″ are available with vent slots
Radius – ‘F’ Reveals can be curved to meet your required specifications (Radius Order Form).
