Our Eliminator Trim is a PCS alternative & will save time and money on any project. Designed for aluminum reveals that use ⅞” stucco/plaster. These products put an end to stained or scratched reveals that currently happen on many projects. The installation of these plaster trims that will show a clean, modern architectural look to add a perfect finish. Below is a quick video
ELIMINATOR TRIM The PCS Alternative
Introducing Eliminator channel screed by Brand X metals is this how your reveal looks? Are they cracking on the nailing flange? Stained by stucco? Now you can eliminate these common finish problems. Eliminator channel screed can deliver a perfect finish every time. The two-piece Eliminator trim is a revolutionary new approach to achieving beautiful architectural reveals. Part A is a receiver track which is fastened directly through the bottom of the channel. This eliminates fifty percent of the fasteners required in typical installations. There are no nailing flanges to crack your plaster. Part B is a cover plate that securely snaps into place.
Our snap in reusable masking keeps Part A clean while, all 3 coats are applied.
The race track style splicers help simplify laying out designs for the installers. The time saving reusable masking delivers perfect trim protection every time. Part A has a built in brown ground that gives the plaster an exact reference point to cut back the plaster base. Our intersections come to the job site fully welded. This saves contractors labor, time and material costs. When water proofing the project the snap-in cover plate never comes in contact with wet material. When the finish coat has been completed, and dried Part B can be snapped in. The result will be a scratch, and stain free finish.
Eliminator Channel Screed 
Eliminator Trims Prior To Snap In 
A & B Trims Snapped In 
Connector Splice Plates 
Part A & B 
Eliminator Trims
Eliminator 2 Piece Stucco Trim
Also more on EIFS finish stucco channel